Skip to content Skip to footer

Automatic Digital Pull Off Tester

Automatic Digital Pull Off Tester: Used to determine the bonding strength of concrete overlay adhesion. Complies with EN 1542, EN 1348, EN 1015-12. Exported to Philippine laboratories.

SKU: NL 3020 X / 002 Category: Product ID: 5511

Description

Overview

Automatic Digital Pull Off Tester: used to determine the bonding strength of concrete overlay adhesion. Also suitable for measuring the strength of applied coatings such as plastic, mortars, plasters, tiles, bituminous coats as well as paint & other coatings on metal. It tests at any measuring point on the component, without requiring specimen preparation. However, a suitable depth of coring diameter same as the test disc is prepared prior to pulling off the surface bonding. Supplied complete with carry case. Accessories to be ORDER SEPARATELY.

Model NL 3020 X / 002. Key figures: Max. Load Capacity 10 X 0.001 kN sensitivity NL 4016 X / 003 – A 001 Adhesion Test Aluminium Disc 20 mm; Loading Speed 5 ± 1mm/min square, 50 x 50 mm, 20 mm thick; Tester Weight 5.9 kg (n。 10 pieces) Standard: EN 1348; Power 220~240V, 1Ph (Main Supplied for Charger).

For laboratories in the Philippines

In the Philippines, this equipment is used for testing to DPWH Standard Specifications (the Blue Book), which call up ASTM and AASHTO test methods. The relevant local reference is PNS 07 (Portland cement). Manufactured by NL Scientific in Malaysia and exported to the Philippines, with calibration available from our ISO/IEC 17025 accredited laboratory. Contact us for a quotation.

Applications & Test Methods

Automatic Digital Pull Off Tester is used for cement, lime and mortar quality control in cement plants and construction laboratories. It supports test procedures to EN 1542, EN 1348, EN 1015-12. Browse all Cement & Mortar testing equipment.

Supplied With

  • Fitting Adaptor Set
  • Data Cable (Black)
  • Power Charger Set

Optional Accessories

  • Adhesion Test Aluminium Disc 20 mm
  • dia. by 20 mm thick (n。 10 pieces)
  • Adhesion Test Aluminium Disc 50 mm
  • Adhesion Test Stainless Steel Disc
  • It confirms to EN 1015-12 Specification
  • Adhesion Test Aluminium Disc,
  • square, 50 x 50 mm, 20 mm thick
  • Cylindrical ring, having truncated
  • cone shape, inside dia. 50 mm

Technical Specifications

Model Number NL 3020 X / 002
Max. Load Capacity 10 X 0.001 kN sensitivity NL 4016 X / 003 – A 001 Adhesion Test Aluminium Disc 20 mm
Accuracy & Repeatibility ≤1.0% F.S dia. by 20 mm thick (n。 10 pieces)
Piston Travel 30 mm
LED Display 42 x 32 mm
Display Unit kN or MPa NL 4016 X / 003 – A 004 Adhesion Test Aluminium Disc,
Loading Speed 5 ± 1mm/min square, 50 x 50 mm, 20 mm thick
Tester Weight 5.9 kg (n。 10 pieces) Standard: EN 1348
Power 220~240V, 1Ph (Main Supplied for Charger)

Compliance Standards

  • EN 1542
  • EN 1348
  • EN 1015-12

Why NL Scientific

  • Manufactured in Malaysia to European standards, exported to 40+ countries
  • Ready stock in a large warehouse for prompt delivery
  • ISO/IEC 17025 accredited calibration laboratory
  • Over 3,000 products for civil engineering and material testing

Request a Quote

Reviews

There are no reviews yet.

Be the first to review “Automatic Digital Pull Off Tester”

Your email address will not be published. Required fields are marked *